A Murfreesboro backyard works hard for a living. In the established neighborhoods, decks and fences sit under big hardwoods that keep them shaded and damp long after the rain stops; out in the newer growth, fresh fences and pool decks face their first seasons of pollen and mildew. Either way the pattern is the same: Tennessee humidity turns deck boards slick with algae, mildew creeps up the shaded runs of fencing, wood that was golden grays out a board at a time, and pool decks go slippery right where people walk barefoot.
American Pressure Washing brings Murfreesboro's outdoor living spaces back with a process built around restraint: the right detergents, and pressure matched to the material in front of us, so everything comes back bright without a splinter raised or a line etched. This is home base — our crew and shop are based in Murfreesboro, our office is in Franklin at 725 Cool Springs Blvd, Suite 600, Franklin, TN 37067, and we're veteran-owned and rated 5.0 stars from 177 Google reviews. Owner Dallas Matthews, in this trade since 1983, has cleaned enough Tennessee wood to know exactly how much pressure is too much.

• Wood decks — pressure-treated pine, cedar, and hardwoods
• Composite decking
• Wood privacy fences and picket fences
• Patios in concrete, natural stone, and pavers
• Pool decks — concrete, stone, and paver
• Pergolas, arbors, and outdoor structures

There is no single setting that washes a backyard. Blast a wood deck and you raise the grain and fur the boards — damage no stain can hide. Blast soft stone or its joints and you scar edges and open mortar lines. Composite shrugs off some things and stains from others, and it wants a gentler chemistry than either. So we start by reading the material: detergent selection and pressure follow the surface, never the other way around. Wood and composite get a soft wash approach — detergents doing the work at low, controlled pressure, applied evenly so there are no stripes or wand marks. Stone and paver get the process their joints and faces can take. Then everything is rinsed thoroughly, top to bottom, so the surface you get back is uniformly clean — and, if stain or seal is in your plans, ready for it. Sealing and protection options are available once the surface is clean and dry.

Weathered wood that has silvered and darkened isn't ruined; it's oxidized and colonized, and it can almost always be brought back. Our restoration process cleans deep into the grain with wood-safe detergents, neutralizes and brightens the surface, and leaves the lumber looking like lumber again: natural color, clean grain, no fuzzed or splintered surface. Restoration is also the essential first half of any stain or seal project — stain laid over dirty, mildew-holding wood fails early and looks patchy doing it. Cleaned and brightened first, then given proper drying time, the same stain goes on evenly and lasts the way it should. If a deck or fence is on your spring list, the wash comes first, and we're glad to help you time the two.
Murfreesboro's fences deserve a specific word, at both ends of town. In the established neighborhoods, privacy fences have stood through years of shade and river-valley damp, and the gray that covers them is oxidation and growth on the surface — not the end of the wood. A proper wash with a brightening treatment brings back the natural tone across the great majority of them. In the newer neighborhoods, young fences gray fast on the street side and green on the shaded side, and take stain unevenly if they aren't cleaned first. Both get the same treatment from us: detergents and controlled pressure matched to the wood, an even pass so there are no stripes, and both sides cleaned where access allows.
Algae on a shaded pool deck is a slick film on the exact surface where kids run and everyone walks wet — and in a town full of neighborhood pools and backyard pools alike, it comes back every season. A proper clean takes the slip out of it — reason enough, for most Murfreesboro pool decks, to put the wash on a yearly rhythm.

Blackman • Siegel • the historic downtown Square district • neighborhoods around MTSU • the Stones River and Greenway corridor • The Avenue area • Medical Center Parkway • Walter Hill • Lascassas Pike • and every Murfreesboro backyard in between.


Deck & Fence Washing — Murfreesboro, TN

Deck & Fe

Deck & Fence Washing — Murfreesboro, TN
Not with our method. The damage people fear — splintered, furred boards and etched lines — comes from blasting, and blasting is exactly what we don't do. We use detergents and controlled, material-matched pressure. And if we find boards that are rotted or a fence section that's failing, we'll show you before we clean, not after.
In most cases, yes. Gray weathering is a surface condition. Cleaning plus a brightening treatment restores the wood's natural tone across the great majority of fences we see — and we'll tell you honestly if yours is the exception.
Yes. Composite gets its own gentler process that lifts algae, pollen, and mildew staining without harming the manufactured finish or voiding its care requirements.
Always. Cleaning and brightening is the preparation that makes stain or seal perform. Let the wood dry fully afterward — a few good days — before anything goes on it, and we'll help you sequence the two.
Every 12–24 months for most decks and fences; shaded lots closer to yearly. Pool decks we recommend yearly as a matter of safety — the algae film comes back on a schedule, and it comes back slippery.
It depends on size, material, and condition, so quotes are individual — fast, free, and without pressure. Use the quote form or call (615) 925-1029.